Operating System:Firmware , 3.94 Mb
SmartDisk FlashTrax XT Firmware 01.02.0033. Your firmware version is listed in Setup in the lower-right corner. Bug Fixed: LCD may flash white when plugging in Video Out cable. Bug Fixed: Video Out power consumption. Using video output could cause excessive battery drain. Firmware Upgrade Procedure:
After downloading the firmware upgrade file from the SmartDisk support website to your PC or Mac, you will see a file named D1376.BIN.Connect your FlashTrax XT to your PC or Mac using USB, as described in the FlashTrax XT User Guide.Copy D1376.BIN from your PC or Mac to the top level of your FlashTrax XT drive. For example under Windows, if your FlashTrax XT shows up as drive F: on your PC, copy this file so it appears in the F: directory and not in a subdirectory.Properly disconnect the USB connection between your FlashTrax XT and the PC or Mac.After disconnecting from USB, be sure your FlashTrax XT is powered by the A/C adapter. (Problems can occur if running from a battery and the battery dies during the update process.)Navigate to the Setup icon from the main menu and press Enter.Press Enter on System.Arrow down to Firmware Update, press the right arrow key to change No to Yes and press Enter.After a few seconds, you will see a pop-up showing New Version and Current Version. Verify that the New Version is a higher version number, and press Enter to start the update process. The screen will indicate progress of the update, and after a short while will display a message that the update is complete. Next, FlashTrax XT will power off automatically.
We recommend! 
