Driver Name:Brother NC 2100h Main Firmware , Version:v3.62 , System:Windows , Size:354KB.
We recommend! Click to Update ALL Soltek Drivers
Operating System:Windows , 354KB
NC-2100h Main Firmware v3.62
Please be sure to have Restore Factory Defaults operation after updating the main firmware from an older version than V3.50. Refer to your network board users guide for how to do Restore Factory defaults.
BR Administration 32 bits version also allows you to have this operation.
1)Run the BR Administration 32 bits version.
2)Select one from NC-2010h, NC-2010p and NC-2100h
3)Open Control menu -> Configure Device -> Configure Dialog.
4)Click Control tab and press the Restore Factory Defaults button.
As the configurations you made will be cleared and return to the factory defaults, please re-configure your network board.
For NC-2010h users
When updating the NC-2010h firmware, your printer might indicate MIO ERROR and soon it will show Now Initializing. Even if you see these messages, PLEASE DO NOT POWER OFF THE PRINTER and leave it for a while with power on as the firmware update is correctly executed.
Upon finishing the firmware update, the printer will make himself online automatically. Please make sure that the NC-2010h has updated with the new firmware by using BRAdmin32. Once you could confirm the new firmware version, you can power off the printer.
.
This step-by-step guide describers how to install Brother NC 2100h Main Firmware drivers for Windows.
1. Download Brother NC 2100h Main Firmware v3.62.
Note: you can update all Drivers automatically with Driver Detective 
